SC-5001-2E1 Trunk gateway series with 2 port E1/T1

    The SC-5001 E1/T1 Trunk Gateway Series is a multi-functional gateway designed specifically for large enterprises, telecom operators, call centers and providers of value-added services. This gateway is designed to provide users with an intuitive, integrated and cost-effective way to build, manage and enhance communication networks. It supports a range of signaling protocols, realizing the interconversion between SIP/H.323 and traditional signals such as SS7 and PRI. It supports multiple codec methods G.711, G.723, G.729 and ILBC, improves the utilizing efficiency of trucking resources while ensuring voice quality.

    SC-5001 E1/T1 trunk gateway series is with high-efficient design and strong DSP processor to ensure the inter-conversion of PCM voice signal and IP packets, although the gateway has been fully loaded. It can be connected with multiple devices such as softs witches, PBX and those servers equipped with digital trunk interfaces.

Key Features

Efficient concurrent processing, up to 240 channels (4/8 E1)

Easy capacity upgrades by cascade, up to 64 E1/T1 ports
High-reliability SS7 signaling point code solution

Support T.38, Pass-through fax, as well as modem and POS machines

Support multiple coding standards: G.711A/U, G.723.1, G.729A/B and iLBC

High compatibility, interoperable with PBX of Avaya, NEC and Alcatel, and also leading soft-switch of Huawei, Cisco and ZTE, etc.

Physical Interfaces

E1/T1 Ports

     1 or 2 E1/T1 (SC-5001-1E1, SC-5001-2E1)

Interface Type

     RJ48 (Impedance 120Ω）

Ethernet Interface

     FE1: 10/100 Base-T Adaptive Ethernet

     FE0: 10/100 Base-T Adaptive Ethernet

Serial Port

    1* RS232, 9600bps 

Voice Capabilities

Codecs:G.711a/μ law,G.723.1, G.729A/B, iLBC 13k/15k

Silence Suppression

Comfort Noise

Voice Activity Detection

Echo Cancellation (G.168),with up to 128ms

Adaptive Dynamic Buffer

Voice ,Fax Gain Control 

 FAX:T.38 and Pass-through

Support Modem/POS

DTMF Mode: RFC2833/SIP Info/In-band

Clear Channel/Clear Mode

PSTN

ISDN PRI:

• 23B+D (T1),30B+D (E1), NT or TE
• ITU-T Q.921, ITU-T Q.931, Q.Sig

Signal 7/SS7:

• ITU-T, ANSI，ITU-CHINA
• MTP1/MTP2/MTP3, TUP/ISUP

E1 Frame Type : DF,CRC-4,CRC_ITU

T1 Frame Type :

• 4-Frame Multi-frame (F4,FT),2-Frame  Multi-frame (F12, D3/4), Extended Super-frame (F24, ESF) ,Remote Switch Mode (F72, SLC96)

Line Codes:

• E1:NRZ,CMI,AMI,HDB3
• T1:NRZ,CMI,AMI,B8ZS

Clock

• Local/Remote Clock Source

VoIP Protocol

• SIP v2.0 (UDP/TCP), RFC3261

           SDP,RTP(RFC2833), RFC3262,

           3263,3264,3265,3515,2976,3311

• RTP/RTCP, RFC2198, 1889
• SIP-T,RFC3372, RFC3204, RFC3398
• H.323
• SIP Trunk Work Mode: Peer/Access
• SIP/IMS Registration: with up to 256 SIP Accounts
• NAT: Dynamic NAT, Rport

Software Features

• Local/Transparent Ring Back Tone
• Overlapping Dialing
• Dialing Rules， with up to 2000
• PSTN group by E1 port or E1 Timeslot
• IP Trunk Group Configuration
• Voice Codecs Group
• Caller and Called Number White Lists
• Caller and Called Number Black Lists
• Access Rule Lists
• IP Trunk Priority
• RTP and Signaling Encryption （VOS RC4)

Call Features

• Flexible Route Methods

           PSTN-PSTN, PSTN-IP, IP-IP, IP-PSTN

• Intelligent Routing Rules
• Call Routing base on Time
• Call Routing base on Caller/Called Prefixes
• 256 Route Rules for each Direction
• Caller and Called Number Manipulation

Environmental

• Power Supply: 100-240VAC, 50-60 Hz
• Power Consumption:25W
• Operating Temperature:0 ℃  ~ 45 ℃

            Storage Temperature: -20 ℃ ~80 ℃

• Humidity:10%-90% Non-Condensing
• Dimensions(W/D/H): 436*300*44.5mm(1U)
• Unit Weight: 2.0kg
• Compliance: CE, FCC