LTE Wifi ATA with 1SIM 1 FXS 1 FXO 1 WAN 4 LAN, WiFi AP Hotspot, 2.4GHz, VoLTE
SunComm SC-111-WA4G LTE Wifi ATA with 4G 1SIM, 1 FXS, 1 FXO, 1 WAN, 4 LAN, WiFi AP Hotspot, 2.4GHz, FCC
Description
SC-111-WA4G Wifi ATA with 4G LTE is a multi-functional terminal, integrating voice (PSTN, VoIP) and data service (LTE 4G/ WCDMA 3G). It provides 3 voice interfaces (LTE/ GSM, FXS and FXO), offering seamless connectivity to VoIP Network, PLMN and PSTN.
Based on SIP, it can interacts with VoIP network and supports GSM/ 3G WCDMA/ 4G LTE frequency,
SC-111-WA4G supports WiFi and high-speed data-handling capacity, allowing users to enjoy high-speed internet surfing through WiFi or the LAN port.
With VPN transparent transfer function, SC-111-WA4G is ideally suitable for personal and SOHO or small office use.
Production information
| Model | Description |
| SC-111-WA4G WIFI ATA with 4G |
1 LTE SIM, 1 FXO, 1 FXS, WIFI, 1WAN, 3LAN, Built in SIP Server |
| SC-101-WA4G Wifi ATA with 4G |
1 LTE SIM, 1 FXS, WIFI, 1WAN, 3LAN, Built-in SIP Server |
| Key FeaturesS |
► FXS / FXO / GSM / LTE interface on a single device ► Send/receive calls from PSTN/ PLMN via FXO/GSM/LTE ► Flexible dial plan, via time, numbers, source IP etc. ► IVR customization ► High speed NAT forwarding, support WIFI hotspot ► Built-in SIP server, support up to 32 SIP Extensions ► User-friendly web interface, multiple management ways |
| Physical Interfaces | ► FXS Port: 1 ► FXO Port: 1 ► SIM Slot: 1 ► Ethernet Interface:1WAN & 3 LAN 10/100 Base-T RJ45 ► WIFI: 2.4GHz 802.11b/g/n, 2T2R |
| Voice Capabilities | ► VoIP Protocols: SIP over UDP/TCP/TLS,SDP,RTP/SRTP ► Codec: G.711a/μ law, G.723.1, G.729A/B, iLBC, G.726 ► Silence Suppression ► Comfort Noise Generator (CNG) ► Voice Activity Detection (VAD) ► Echo Cancellation: G.168 with up to 128ms ► Dynamic Jitter Buffer ► Adjustable Gain Control ► Automatic Gain Control (AGC） ► Call Progress Tones: Dial Tone, Ring Back Tone, Busy Tone ► FAX: T.38 and Pass-through ► NAT: STUN/ UPnP ► DTMF: RFC2833/ SIP Info/ In-band |
| FXS | ► Connector: RJ11 ► Caller ID: Bellcore Type 1&2, ETSI, BT, NTT and DTMF ► Answer & Disconnect Signaling: Answer, Disconnect, Busy Tone ► Polarity Reversal ► Hook Flash |
| FXO | ► Connector: RJ11 ► Caller ID: FSK, DTMF ► Polarity Reversal ► Answer Delay ► Busy Tone Detection ► No Current Detection |
| Mobile | ► GSM/GPRS/EDGE: 900/1800MHz ► WCDMA (3G): UMTS/HSDPA/HSPA+ B1/B8 TD-SCDMA B34/ B39 ► LTE (4G): TDD-LTE B38/B39/B40/B41 FDD-LTE B1/B3/B7/B8 ► SIM/ USIM: 1 USIM per Channel ► SIM Card: 1.8V, 3.0V ► Antenna: 3.0dB, SMA Interface ► SMS/ USSD |
| Supplementary Services | ► Call Forward (Unconditional/No Answer/Busy) ► Call Waiting ► Call Hold ► Call Transfer ► Hotline ► Do-not-disturb ► 3 Way Conference |
| Software Features | ► Ring Group ► Routing Groups ► Caller / Called Number Manipulation ► Routing Base on Time Period ► Routing Base on Caller/Called Prefixes ► Routing Base on Source Trunks ► Dial Rules ► Failover Routing ► FXO Impedance Auto Match ► IVR Customization ► Auto Attendant Function ► CDRs |
| Maintenance | ► Web GUI Configuration ► Telnet Management ► Configuration Restore/Backup ► Multiple Languages Supported ► HTTP / TFTP / FTP Firmware Upgrade ► Auto Provision ► CDR Report and Export ► Syslog ► Ping and Tracert ► Traffic Statistics: TCP,UDP,RTP ► Network Capture ► NTP |
| Environmental | ► Power Supply: 12VDC, 1A ► Power Consumption: 10W ► Operating Temperature. 0 ℃ ~ 45 ℃ Storage Temperature: -20 ℃ ~80 ℃ ► Humidity: 10%-90% Non-Condensing ► Dimensions (W/D/H): 126×75×25mm ► Unit Weight: 0.7kg |
